勤杂工 发表于 2014-4-3 15:30:31

abaqus仿真时遇到错误，求大神解

好像意思是刚体上的参考点没有转动惯量约束，求大神解The rigid bodies with the reference nodes contained in node set ErrNodeRefNodeNoRotInert have no rotary inertia associated with them and the rotational degree of freedom of the reference nodes is not restrained. Either rotary inertia must be defined at the reference node or the rotational degree of freedom of the reference nodes must be constrained. See the status file for further details.

黄伟 发表于 2014-10-16 22:34:22

刚体参考点应该施加转动惯量或者施加响应的约束，不然引起刚体位移

ADAMS20170417 发表于 2017-4-17 21:19:01

黄伟 发表于 2014-10-16 22:34
刚体参考点应该施加转动惯量或者施加响应的约束，不然引起刚体位移

非常感谢分享，支持一下！
页: [1]
查看完整版本: abaqus仿真时遇到错误，求大神解