方案二：Ansoft Help文档—“Coupling Maxwell Designs with ANSYSThermal via Workbench”
19. To export the thermal result to Maxwell,right-click on the Imported Load (Maxwell2DSolution), or Imported Load(Maxwell3DSolution)and select ExportResults.
20. To fully utilize the automationcapabilities provided in ANSYS Workbench, select Imported Load (Maxwell2DSolution),or ImportedLoad(Maxwell3DSolution); and in its Detailwin-dow, select Yesfor Export afterSolve. With this option selected, users can continue the itera-tionbetween Maxwell/Thermal simulations from the Workbench schematic.
To “push” the exported thermal resultsback to Maxwell, right-click on Maxwell's Solution cell on the Workbenchschematic and select Enable Update. Then, right-click again on Max-well's Solution cell and select Update. Thiswill trigger Maxwell to re-simulate its solution with thermal results.
To continue the solve iterations,repeat the following steps as needed:
a. Right-click on Thermal's Setup cell and select Refresh.
b. Right-click on Thermal's Setup cell and select Update.
c. Right-click on Maxwell's Solution cell and select Enable Update.
d. Right-click on Maxwell's Solution cell and select Update.
