标题: ANSYS 出现这个错误，怎么解决？ [打印本页] 作者: 马强 时间: 2013-5-14 17:26 标题: ANSYS 出现这个错误，怎么解决？ *** WARNING *** CP = 568.078 TIME= 15:08:18 Coefficient ratio exceeds 1.0e8 - Check results. *** ERROR *** CP = 571.229 TIME= 15:08:22 The value of TEMP at node 1 is 1.334839109E+27. It is greater than the current limit of 1000000. This generally indicates rigid body motion as a result of an unconstrained model. Verify that your model is properly constrained.作者: 赵春雨 时间: 2013-5-16 10:48
边界约束没施加对