在Infolytica中模拟线圈时，出现错误代码154026，该如何解决？

•154026 - A coil terminal is in direct contact with another terminal and/or a flux tangential boundary condition (the terminals are shorted). Some special cases are worth noting: Error 154026 will occur if the terminal leads are slightly sticking out of the air box (this is usually unintentional and results from a geometric modeling error); Error 154026 will occur if no air box is present in the model or if the coil is not embedded in the air box, since in that case a Flux Tangential boundary condition is by default applied to all the outer faces of the model, including the coil's volumes surfaces; Error 154026 will occur if the Perfect Electric Conductor material is assigned to the coil; If the coil definition contains components, those components are considered to be insulated from any other conducting components and therefore error 154026 will not occur.