4347 预览 在Ansys中,碰到错误AN error occured during sweeping while meshing arer 39.change element sizing parameters(RSIZE,LESIZE,etc).or mesh this arer manually(AMESH or AMAP).then try the VSME command again .The VSWE command is ignored.这是什么原因？怎么解决？

535 预览 在Ansys中,碰到错误：clear is not a recognized GEGIN command,abbreviation,or macro. this command will be ingored. 这是什么错误？怎么解决？

4531 预览 在Ansys中,用VSBA,ALL,6命令时出现错误：Topological degeneracy detected for VSBA command Try modifying geometry slightly or loosening the tolerance（BTOL command）,If BTOL is relaxed,be sure to change the tolerance back to the default after operation。这是什么原因？怎么解决？

1151 预览 在用Ansys做模态分析时,中途中断,跳出错误提示:*** ERROR *** CP = 1739.797 TIME= 16:31:41 Eigenvalue extraction failed due to a file access error. Possibly insufficient disk space. 主要单元是solid95单元,共11万个单元。这是什么原因？

3486 预览 \"在Ansys中,碰到警告“*** WARNING *** CP = 10.156 TIME= 19:17:20 Cumulative iteration 2 may have been solved using different model or boundary condition data than currently stored. POST1 results may be erroneous unless you RES

738 预览 在Ansys中,碰到警告“Memory available for solver = 522.38 MB； Memory required for in-core = 6435.80 MB； Optimal memory required for out-of-core = 758.20 MB； Minim ...；”,这是什么原因？

696 预览 在Ansys计算时,遇到Nagative or zero pivot；pivot value=0.0000000e+.000.这是什么原因？

7101 预览 在Ansys仿真时,遇到提示：K is not a recognized BEGIN command, abbreviation, or macro. This command will be ignored. 这是怎么回事？

909 预览 在Ansys中,solid95单元建立的混凝土单元,分网之后（方法是：先在面上指定单元尺寸,自由划分,然后vsweep分体）弹出警告：如附件。solid95单元只被推荐用于低应力区域．然后在求解过程后,一加重力就出这样的错误,又出错误：如附件错误。这是什么问题？

847 预览 在Ansys中,做塔的屈曲分析时(用弧长法)出现了如下错误,应该怎么解决？

771 预览 在Ansys中,用wishangtian 斑竹的方法将屈服准则改为BISO能够收敛了,可是根据计算结果,为什么得不到位移荷载曲线？

654 预览 在Ansys仿真时,遇到错误：error：Meshing of volume 5 has been aborted because of a lack of memory. Closed down other processes and/or choose a larger element size, then try the VMESH command again. Minimum additional memory required=853MB.这是什么错误？

819 预览 在Ansys中,遇到警告：*** WARNING *** CP = 24.312 TIME= 18:23:02 Due to merging of areas 3251 and 3304, nodes 52094 through 52101 are no longer associated with any area.这是什么意思？

4240 预览 在Ansys中,遇到警告：After NUMMRG,ALL, node 84 (and possibly others) is associated with more than one solid model entity. Future commands which depend on the node to solid model connectivity (meshing, mesh clearing, solid BC transfer, etc.) may not operate prop

4527 预览 在Ansys中,划分网格时遇到的错误：Error！Area 22 is not parallel to the global XY plane, Cannot mesh with 2-D planar elements。这是什么意思？

1625 预览 在Ansys中,遇到提示：the anel material 2 at temperature=0 is not positive defineite,a full 6*6 matrix is need as at least one element typeinthe medel is 3_d cheeck input.这是什么意思？

1380 预览 在Ansys中,进行网格划分时,遇到提示：Unable to mesh area 9 because of shape problems. It may help to change element size on edges of area.这是怎么回事？

6113 预览 在Ansys中,进行网格划分时,遇到提示：Unable to mesh area 9 because of shape problems. It may help to change element size on edges of area.这是怎么回事？

1326 预览 在Ansys中,碰到如下两个警告。它们对结果有影响吗？

7259 预览 在Ansys仿真时,遇到错误error:keypoint 10 is referenced by only one line. Improperly connected line set for AL command.这是什么意思？怎么解决？